Name *

First Name

Last Name

Date

MM

DD

YYYY

1. What parts of the machine are dangerous? *

1. Stalk Cutter Blade Swing Arm

2. Stripper Head

3. Stalk Grab-rollers

2. If a stalk falls while the machine is moving, what should you do? *

1. Catch it immediately.

2. Stop the machine and release the pedal.

3. Increase the machine's speed.

3. Why should you not touch the machine's moving parts? *

1. To adjust settings.

2. To avoid accidents.

3. To clean the machine.

4. Why should you not reach behind the cover plate while the machine is running? *

1. To avoid getting dirty.

2. To prevent accidents.

3. To check controls.

1. What should you check before starting the machine? *

1. Engine oil level

2. Diesel fuel level

3. Hydraulic oil level

2. How do you start and stop the engine safely? *

1. Pre-heat engine, then start at 1000 rpm.

2. Start immediately after pre-heating.

3. Start at maximum rpm.

3. What should you do in an emergency? *

1. Pull the red cable; press blue button to restart.

2. Continue operating normally.

3. Switch off the engine and leave the machine.

1. How do you control the machine's speed? *

1. Turn the speed regulator; start slowly.

2. Press the throttle switch.

3. Adjust hydraulic pressure.

2. What should you do before starting work? *

1. Adjust engine speed and switches.

2. Start immediately after starting the engine.

3. Skip setup and start working.

3. How should you move the stalk cutter arm? *

1. Slowly, checking for space.

2. Quickly to save time.

3. Without checking surroundings.

4. What about driving with automatic steering? *

1. Turn on; turn off before leaving.

2. Never use; always steer manually.

3. Keep it on at all times.

1. How do you harvest? *

1. Put stalk between knives; feed through.

2. Avoid putting stalks between knives.

3. Use hands to guide stalks.

2. Why is cleaning the stripper head important? *

1. To prevent malfunctions.

2. It's not necessary.

3. To save time.

3. Why stop the stalk cutter blade before getting off? *

1. To save time.

2. To prevent accidents.

3. To avoid damaging the blade.

4. What do you do if the sprouts are still on the leaf's? *

1. Throw them on the ground.

2. Shake them off, if they don't ring your boss.

3. It doesn't matter what you do.